IfcAppliedValueSelect
Definition from IAI: The IfcAppliedValueSelect defines the selection of whether a value (expressed as a ratio) or an amount should be used as the value for an IfcAppliedValue.
Select from:
HISTORY: New SELECT type in IFC 2x2.
Use Definitions
Selecting IfcMeasureWithUnit allows the specification of both the actual figure for the value together with the currency (for a cost value) or an environmental measurement unit (in the case of an environmental impact value) in which the value is represented.
Selecting IfcMonetaryMeasure allows the specification only of the value, the currency being as set by the global context
Selecting IfcRatioMeasure assumes that the amount is a percentage or other REAL number. Note that if the amount is normally specified as -20%, then this figure will need to be converted to a multiplier of 0.8
EXPRESS specification:
|