IfcBoundaryNodeCondition
Definition
from IAI: The entity IfcBoundaryNodeCondition
describes boundary conditions that can be applied to structural point
connections, either directly for the connection (e.g. the joint) or for
the relation between a structural member and the connection.
The following conventions to
the values of the LinearStiffness[X,Y,Z]
and RotationalStiffness[X,Y,Z]
apply:
- value (-1.) represents an
infinitive large value – or a fixed connectivity with
infinitive stiffness
- value zero (0.), represents
no stiffness or a free connectivity
- any other value represents a
finitive stiffness or spring connectivity in that direction or rotation
- value NIL ($) represents an
unknown connectivity condition
NOTE: Instances of the entity IfcBoundaryNodeCondition
are used e.g., to define the boundary condition for instances of IfcStructuralPointConnection
or IfcRelConnectsStructuralMember
pointing to a structural node connection.
HISTORY: New entity
in Release IFC2x Edition 2.
EXPRESS specification:
|
ENTITY IfcBoundaryNodeCondition
|
|
Attribute definitions:
LinearStiffnessX
|
:
|
Linear stiffness value in x-direction of the coordinate system defined by the instance which uses this
resource object.
|
LinearStiffnessY
|
:
|
Linear stiffness value in y-direction of the coordinate system defined by the instance which uses this
resource object.
|
LinearStiffnessZ
|
:
|
Linear stiffness value in z-direction of the coordinate system defined by the instance which uses this
resource object.
|
RotationalStiffnessX
|
:
|
Rotational stiffness value about the x-axis of the coordinate system defined by the instance which uses
this resource object.
|
RotationalStiffnessY
|
:
|
Rotational stiffness value about the y-axis of the coordinate system defined by the instance which uses
this resource object.
|
RotationalStiffnessZ
|
:
|
Rotational stiffness value about the z-axis of the coordinate system defined by the instance which uses
this resource object.
|
Inheritance graph
|
ENTITY IfcBoundaryNodeCondition;
|
|