IfcStructuralPlanarAction

Definition from IAI: Instances of the entity IfcStructuralPlanarAction are used to define constant planar actions. Structural loads applicable to planar actions are IfcStructuralLoadPlanarForce and IfcStructuralLoadTemperature.

The structural load, defining the planar action is given by the attribute AppliedLoad at the supertype IfcStructuralActivitiy. The coordinate system, in which the AppliedLoad is defined is given by the attribute ObjectPlacement at the supertype IfcProduct.

HISTORY: New entity in Release IFC2x Edition 2.

Topology Use Definition

Instances of IfcStructuralPlanarAction shall have a topology representation. It includes a placement and a product representation. The IfcProductRepresentation shall be given by an item of Representations being of type "IfcTopologyRepresentation".

Placement

The placement for IfcStructuralPlanarAction is determined at its supertype IfcProduct. It is defined by the optional IfcObjectPlacement, referenced by ObjectPlacement at IfcProduct, which establishes, if given, the object coordinate system that is referenced by the applied load.

If the ObjectPlacement attribute is omitted, then all topological representations are given directly in world coordinates.
If the ObjectPlacement attribute is provided, then it establishes an object coordinate system for all topological representations which are given object coordinates.
- If the PlacementRelTo relationship of IfcLocalPlacement is omitted, the object coordinate system is established within the world coordinate system.
- If the PlacementRelTo relationship of IfcLocalPlacement is given, it shall point to the local placement of the same IfcSpatialStructureElement, which is used in the ContainedInStructure inverse attribute, or to a spatial structure element at a higher level, referenced by that.

Topology Representation

Instances of IfcStructuralPlanarAction shall have a topology representation given by a face with an optional additional geometric representation of the included surface. It can be provided by either

IfcFace
IfcFaceSurface

which should be the single item of IfcTopologyRepresentation.Items.

EXPRESS specification:

ENTITY IfcStructuralPlanarAction

SUPERTYPE OF

(IfcStructuralPlanarActionVarying)

SUBTYPE OF (

IfcStructuralAction);

ProjectedOrTrue

IfcProjectedOrTrueLengthEnum;

WHERE

WR61

SIZEOF(['IFCSTRUCTURALLOADRESOURCE.IFCSTRUCTURALLOADPLANARFORCE', 'IFCSTRUCTURALLOADRESOURCE.IFCSTRUCTURALLOADTEMPERATURE'] * TYPEOF(SELF\IfcStructuralActivity.AppliedLoad)) = 1;

END_ENTITY;

Attribute definitions:

ProjectedOrTrue

Defines if the load values are given by using the length of the member on which they act (true length) or by using the projected length resulting from the loaded member and the global project coordinate system. It is only considered if the global project coordinate system is used, and if the action is of type IfcStructuralLinearAction or IfcStructuralPlanarAction.

Formal Propositions:

WR61

A planar action should place either a planar force or a temperature force.

Inheritance graph

ENTITY IfcStructuralPlanarAction;

ENTITY IfcRoot;

GlobalId

IfcGloballyUniqueId;

OwnerHistory

IfcOwnerHistory;

Name

OPTIONAL IfcLabel;

Description

OPTIONAL IfcText;

ENTITY IfcObjectDefinition;

INVERSE

HasAssignments

SET OF IfcRelAssigns FOR RelatedObjects;

IsDecomposedBy

SET OF IfcRelDecomposes FOR RelatingObject;

Decomposes

SET [0:1] OF IfcRelDecomposes FOR RelatedObjects;

HasAssociations

SET OF IfcRelAssociates FOR RelatedObjects;

ENTITY IfcObject;

ObjectType

OPTIONAL IfcLabel;

INVERSE

IsDefinedBy

SET OF IfcRelDefines FOR RelatedObjects;

ENTITY IfcProduct;

ObjectPlacement

OPTIONAL IfcObjectPlacement;

Representation

OPTIONAL IfcProductRepresentation;

INVERSE

ReferencedBy

SET OF IfcRelAssignsToProduct FOR RelatingProduct;

ENTITY IfcStructuralActivity;

AppliedLoad

IfcStructuralLoad;

GlobalOrLocal

IfcGlobalOrLocalEnum;

INVERSE

AssignedToStructuralItem

IfcRelConnectsStructuralActivity FOR RelatedStructuralActivity;

ENTITY IfcStructuralAction;

DestabilizingLoad

BOOLEAN;

CausedBy

OPTIONAL IfcStructuralReaction;

ENTITY IfcStructuralPlanarAction;

ProjectedOrTrue

IfcProjectedOrTrueLengthEnum;

END_ENTITY;